Plastic Mist Nozzles (beige): 10-24, 10-32 thread or barbed style significantly reduces the air temperature up to 20. It is used for outdoor cooling, indoor propagation, fodder growing and lowering the heat experienced by animals during the summer. Choose the location where you want to position your misting nozzle and drill a hole in PVC pipe slightly smaller than the 10/24 thread on your mister. Screw the threaded end of the misting nozzle in to secure. Mister should be installed at a 120 angle to the ground, 3 to 4 feet apart. Specs: Misting angle is 70. Purple Nozzle Flow Rate (3/4 gph): 0.76 gph @35 psi, 0.85 @50 psi, 0.91 @65 psi. Diameter 2.5'.  Black Nozzle Flow Rate (1 gph): 0.85 gph @35 psi, 1.04 @50 psi, 1.17 @65 psi. Diameter 2.5'. Operating Pressure is 35-80 psi.

Tip: Use a calcium filter, a 200 mesh stainless steel filter to prevent clogging.

   
#682 #685 #681 #684
#682 - 3/4 GPH 10-24 Thread Mist Nozzle #685 - 1 GPH 10-24 Thread Mist Nozzle #681 - 3/4 GPH 10-32 Thread Mist Nozzle #684 - 1 GPH 10-32 Thread Mist Nozzle
3/4 GPH 10-24 Thread Mist Nozzle 1 GPH 10-24 Thread Mist Nozzle 3/4 GPH 10-32 Thread Mist Nozzle 1 GPH 10-32 Thread Mist Nozzle
   
#680 #683 #450 #07-066
3/4 GPH Barbed Mist Nozzle 1 GPH Barbed Mist Nozzle 3 GPH Barbed Mist Nozzle 10-32 Thread Mist Nozzle